An All Too Familiar Situation
The following scenario is likely to have affected all budding gemologists or gem cutters:
You sit down at a table in the laboratory or your apartment’s gem room, and examine your new prized gem. It disappears suddenly, almost inaudibly, from between your tweezers. You start to panic and begin searching for it. It’s not visible on the tabletop so you lift and look behind each item.
The search for the gem fails to yield any results so the search continues to the floor. Your eyes and hands move in ever-expanding circles through the room. You reach the farthest pieces of furniture and begin lifting chairs cushions. Nothing. You get frustrated and pull out the vacuum to clean the floor and furniture. You find yourself digging through the dust bag, but it is soon too late.
Let’s take a look at our workspace to keep such scenarios from happening.
Your Gem Room Environment
Your workspace should be neutral-colored and well lit, regardless of whether you are identifying, cutting or making jewelry. The floors should be hard and flat. You have a few options: wood, tile or linoleum, but not carpet.
My personal experience shows that there is a roughly 20% chance of recovering any stone from long shag carpet. Your chances of recovering a stone from long shag carpet are about 20% higher with a tighter pile. This increases to around 50%. A hard floor will almost always have a drop stone.
Small gems can slip easily between carpet fibers. Even in the tightest piles, even a tiny gemstone can slip between the fibers of a carpet. A tiny part of the gemstone’s girdle might stick out from the pile. It may be visible only from one direction, which is likely the one you cannot turn your head to. It will become permanently lost if it is accidentally stepped on.
Hard floors are a completely different situation. When you reach floor level, the first thing you will notice is the dirt. This view is a benefit. Everything on the floor, including your entire gem, will be visible above the surface. Brilliant reflections can be used to quickly identify its location with a flashlight.
Techniques and Tools for Handling Gems
Remodeling your gem room or building a gem laboratory may not be an option in the near future. However, handling gems properly can reduce drop instantly.
The most commonly used tool to hold gems is the tweezer. These tools are also the most likely to send a gemstone flying into the void.
For handling gems, use Locking Tweezers
Locking tweezers are the best for handling gems. They lock the gem in place by moving a slide forward. The gem will not be released if you change the pressure that is applied to the tweezers after it has been properly set.
Avoid Soldering Tweezers
Although soldering tweezer may seem like a great tool for holding gems, the spring tension of these tweezer is too strong to hold small gems. These will cause you to lose more gems and even damage small stones.
How to Buy Gems
Turn the gem upside-down so that it is flat on its side. Next, grab the girdle using your locking tweezers. You can also pick up larger, oblonger stones from different directions. Rounds will not offer secure gripping unless they are turned upside down.
Stone holders
A stone holder allows you to pick out a gem from either the top or bottom, and all sides can be inspected. It is very difficult to accidentally open the holder, so it is a useful tool for giving a gem to someone else.
What to do if a gemstone is lost
First, stop working immediately. Take a moment to think about the sound you heard when the gem fell. This clue will help you to choose the right direction for your search.
Before you start to expand your search:
- Make sure you examine the surface of your table or desk.
- Move items carefully so you can see behind and under them.
- Inspect any containers that are open.
After you are satisfied that the stone has not been placed on the table, take a look at your lap and then at the floor. You can slide your chair back if you don’t see it. This motion could cause the gem to move. A carpeted floor could also cause the gem to be buried. Before you proceed, make sure to inspect the tabletop carefully.
Watch your lap for fallen gems as you stand up. Examine the seat of your chair as well as any folds in your clothes. If you don’t find the gem, move your chair out of the way.
You will now inspect the floor using a flashlight. The flashlight should be pointed down onto the floor. If the gem is not found, place the flashlight on the ground. This is the best way to find lost stones. This will allow you to see gems that are almost invisible by the light.
You can also use your hands to inspect areas you cannot see, such as behind furniture. As you need to expand your search, use the flashlight as your main tool. In case the stone bounced, make sure to check the tops and sides of any furniture nearby.
Knowing when to quit
You can avoid most drops if you use the correct tools and techniques to handle gems. Most dropped gems can be found quickly if you use the right search techniques and a suitable workspace. However, you must realise that some lost gems may not be found, despite all your efforts. Spend not too much time looking.
A vacuuming tip for handling gems
An IGS member sent this tip.
This trick is useful when I am beading. This is my last resort when I can’t see the small items I have dropped on the floor, no matter how hard or wide I look.
Use a silk/nylon stocking that is knee-high and place the toe end in the attachment for a vacuum cleaner. Use a rubber band to secure the stocking at vacuum hose’s mouth. Next, clean the area where you lost your bead/stone. The nylon stocking acts as a filter and allows dust to pass while catching larger objects.
After taking a few swipes, take out your nylon stocking to inspect your results. Take a few more swipes if your stone/bead doesn’t appear. It will eventually show up. Sometimes, it can travel amazing distances from the place it was supposed to be. I have lost many beads over the years, but have managed to find them all.
